Avoid the use of fiber optics products in dust and high humidity,
high temperature and pollution environment.Assure
ventilated, moisture-proof and waterproof,
avoidextrusion during thetransit.Avoid
direct exposureto uv radiation
and high energy
rays use of fiber optic products.Avoid the product together and
plasticizer or polymer plasticizer,Plasticizer could be
transferred tothe product surface, lead to severe
lower optics.Products shouldbe affected by the
organic compounds, including benzene,
acetone, ethyl acetateThinner, gasoline, etc.
Maintain
About washing: light-emitting products should not
touch the water, if there is stain on the clothes,Local use wet cloth to
wipe, can avoid circuit into the water.
Clothes when not in use please use hangers to hang up
Turn off the power and take out the battery.
Question 1: the first use of LED clothes, connected to the battery,
the clothes do not light?
Reason 1: battery no electricity or less. Reason
2: clothes on the power switch is not turned on. Reason
3: controller and clothes to loose or fall off
(check if the controller in the clothes
pocket is properly connected to the clothes)
Question 2: some bright lights of the clothes?
Reasons 1 : the controller is connected with the clothes
the place is not properly connected. Reasons
2 : the line fault, please check carefully. Reasons
3 : local light damage, please check carefully.
Question 3: the use of remote control without reaction?
Reason 1: remote control did not install the battery,
when the button is pressed to see whether the
red indicator light on the remote control. Reason
2: remote control antenna not pulled out Reason
3: remote control is blocked, unable
to transmit the signal. Reason
4:LED clothes on the lack of battery power,
resulting in a remote control signal can not be received.
Question 4: after receiving the clothes, how to let the
clothes light up? Operation steps: Step
1: take out the clothes, the clothes are neatly classified,
check whether the accessories are complete, such as the
controller in the pocket of clothes, remote control, etc. Step
2: check whether the controller in your pocket is connected to
your clothes. Step
3: plug clothes and trousers or headdress connected
each other. Step
4: connect the controller in your pocket to the battery. Step
5: open the clothes manufacturer\'s power switch, the
clothes will shine.
s tep 6: if there is a remote
control, you can use the remote control.